MATERIAL SAFETY DATA SHEET

1. IDENTIFICATION OF SUBSTANCE/PREPARATION & COMPANY.

Product name: Benzoin Resinoid, Pourable

Product code: 30438

Supplier: Essential Oils Direct Po Box 161 Oldham OL2 6FA

Emergency Tel No:  0161 633 3952 Emergency Contact:  Mr. David Freer. 

2. COMPOSITION / INFORMATION ON INGREDIENTS.

Definition/Botanical Origin: A blend of the resin from Styrax benzoin Dry and with DPG as a solvent to render it mobile.

H-No:                                       CAS No: n/a (a mixture)            Status: natural

FDA: 172.510                          IFRA: not restricted                   Application: aromatherapy, skin care etc

RIFM:  monograph                   EINECS:                      RTECS:

INCI name: Propylene glycol, Styrax benzoin Gum                  USP: official

3. HAZARDS IDENTIFICATION:

Xn Harmful 

4. FIRST- AID MEASURES:

Inhalation:  Remove from exposure site to fresh air. Keep at rest. Obtain medical attention.

Eye contact:  Rinse immediately with plenty of water for at least 15 mins. Contact a doctor if symptoms persist.

Skin contact:  Remove contaminated clothes. Wash thoroughly with soap & water, flush with plenty of water. If irritation persists, seek medical advice.

Ingestion:  Rinse mouth out with water. Seek medical advice immediately.

Other:  When assessing action take Risk & Safety Phrases into account (Section 15)

5. FIRE FIGHTING MEASURES.

Extinguishing media  Use CO₂, Dry Powder or Foam type Extinguishers, spraying recommended: extinguishing media to base of flames. Do not use direct water jet on burning material.

Special measures:  Avoid vapour inhalation. Keep away from sources of ignition. Do not smoke. Wear positive pressure self-contained breathing apparatus & protective clothing.

Extinguishing procedures:  Closed containers may build up pressure when exposed to heat and should be cooled with water spray. 
 
 
 
 

6. ACCIDENTAL RELEASE MEASURES.                    

Personal precautions:  Avoid inhalation & direct contact with skin & eyes. Use individual protective equipment (safety glasses, waterproof-boots, suitable protective clothing) in case of major spillages.

Environment precautions:  Keep away from drains, soils, surface & groundwaters.      

Cleaning up methods  Remove all potential ignition sources. Contain spilled material. Cover for spillages: with an inert or non-combustible inorganic absorbent material, sweep up and remove to an approved disposal container. Observe state, federal & local disposal regulations. 

7. HANDLING & STORAGE.

Precautions in handling:  Apply good manufacturing practice & industrial hygiene practices, ensuring proper ventilation. Observe good personal hygiene, and do not eat, drink or smoke whilst handling.  Avoid static discharges.

Storage conditions:  Store in tightly closed original container, in a cool, dry & ventilated area away from heat sources & protected from light . Keep air contact to a minimum.

Fire protection:  Keep away from ignition sources & naked flames. Take precautions to avoid static discharges in working area. 

8. EXPOSURE CONTROLS/PERSONAL PROTECTION.

Respiratory protection:  Avoid breathing product vapour. Apply local ventilation where possible.

Ventilation:  Ensure good ventilation of working area.

Hand protection:  Avoid all skin contact. Use chemically resistant gloves if required.

Eye protection:  Use safety glasses.

Work/Hygiene practices:  Wash hands with soap & water after handling. 

9. PHYSICAL & CHEMICAL PROPERTIES.

Colour:  Red-brown to brown

Appearance:  Viscous liquid.

Odour:  Warm, sweet balsamic.

Flash-point °C:  >100 

10. STABILITY & REACTIVITY.

Reactivity:  It presents no significant reactivity hazards, by itself or in contact with water. Avoid contact with strong acids, alkali or oxidising agents.

Decomposition:  Liable to cause smoke & acrid fumes during combustion: carbon monoxide, carbon dioxide & other non-identified organic compounds may be formed. 

11. TOXICOLOGICAL INFORMATION.

Not tested for skin irritation or photo-toxicity, but anecdotal evidence suggests some irritant properties. Not a sensitiser. D.L.J. Opdyke FCT 1973 11, 871 

12. ECOLOGICAL INFORMATION.

Biodegradability:  Data not available

Precautions:  Prevent surface contamination of soil, ground & surface water. 

13. DISPOSAL CONSIDERATIONS.

Avoid disposing to drainage systems and into the environment. Seek expert advice. 

14. TRANSPORT REGULATIONS.

Road (ADR/RID): n/a                           

Air (IATA):  n/a

Sea (IMDG): n/a       

CHIP: see section 15                        

15. REGULATORY INFORMATION. According to Directive 88/379/EEC

Hazards: Harmful 

Symbols:  Xn

Risk Phrases:    R20/22 – Harmful by inhalation and if swallowed

Safety Phrases:    S36/37 – Wear suitable protective clothing and gloves

      S46 If swallowed seek medical advice immediately and show the  container / label  

16. OTHER INFORMATION.

Cosmetics Directive 7^th Amendment: Restrictions may apply. A source of Benzyl Alcohol, Benzyl Cinnamate and Benzyl Benzoate, listed as sensitisers. Check maximum usage levels for skin care products. 

PACKAGING:

            Type                                Suitability

SHELF LIFE

When stored within advised conditions, re-test after 12 months then at 6 monthly intervals up to a maximum shelf life of 24 months. 

Q.C. REQUIREMENTS.

In-line with general product specification. Always satisfy suitability for specific application. 

The data provided in this material safety data sheet is meant to represent typical data/analysis for this product and is correct to the best of our knowledge. The data was obtained from current and reliable sources, but is supplied without warranty, expressed or implied, regarding its’ correctness or accuracy. It is the user's responsibility to determine safe conditions for the use of this product, and to assume liability for loss, injury, damage or expense arising from improper use of this product. The information provided does not constitute a contract to supply to any specification, or for any given application, and buyers should seek to verify their requirements and product use. 
 
 

DECLARATION OF ALLERGENS 

……………………

David Freer

Technical Manager

12/09